Basic Operations - Retevis Rt43 Bedienungsanleitung

Basic Operations

POWER ON and
Rotate the knob
"click" is heard,
have a short beep sound, indicating
power on detecting success
Attention:
If your transceiver
please check the battery, and confirm
if the battery has been charged
installed correctly. If it still can not be turned on, please contact
with the agent.
To turn off the transceiver, please rotate the power knob /
Volume knob anticlockwise
transceiver is power off.
Adjust Volume
When the transceiver
rotate the power switch / Volume
knob to adjust the volume.
rotation to increase
Anticlockwise rotation
volume. You can press the side key
which is programmed MONITOR
function to monitor
Attention:
MONITOR key can be set to PI or P2 Key according
programming software.
Channel Selection:
Rotation the channel
the desired channel
has 32 channels.
Attention:
There are two zones
POWER OFF:
clockwise until
transceiver will
is not power on,
until a "click" is heard, then
is power on,
Clockwise
the volume;
to decrease
the current volume
knob to select
This transceiver
in this transceiver,
07
a
408
and
soy
the
to the