Retevis RT43 Bedienungsanleitung Seite 12

Receive All Call
All Call is a call
ers in the same channel. It is used to announce something
important that users must pay special
all call, LED indicator turns green.
Notice: when receiving
the transceiver
can use any re-programmed
Launch a Transceiver
You can choose
methods.
• Channel Knob
Launch a Group Call
To launch a group call, the transceiver
belonging to that group
1.Rotate channel knob, using activated group ID to select
channel.
2.Hold the transceiver vertically and keep about
1—2inches(2.5-5.0cm)
3. Press PTT key to respond
4. Release PTT key to receive, when the target transceiver
responds, LED indicator
Launch a Individual
I. Rotate channel
channel.
2. Hold the transceiver
1—2inches(2.5-5.Ocm) away from mouth
3. Press PTT key to respond
4. Release PTT key to receive,
responds, LED indicator turns green
from an individual
all call, if you turn to another
stop to receive
key until the call finished
Call
a channel, user ID or group call with following
away from mouth
the call, LED indicator
turns green
Call
knob, using activated
vertically
the call, LED indicator
10
transceiver
attention
all call. During the all call, you
must be configured
group
and keep about
when the target transceiver
calls all transceiv-
to. VVhen received
channel,
as
turns red
ID to select
turns red.