Retevis RT43 Bedienungsanleitung Seite 11

1 has been changed
hear a negative
1 in this transceiver.
After selecting the intercom
required Zone setting(lf there are multiple Zones in the
intercom) Rotary channel
tative channel,
Receive and Reply
You can received or reply call after finished channel / user ID or
group ID's setting.
turns red. When
green
Receive and Reply Group Call
To receive a call from a user's group, the transceiver
configured as belonging
1.LED indicator turns green
2.Hold the transceiver
1—2inches(2.5-5 Ocm) away from mouth.
3. Press PTT key to respond
4. Release PTT key to receive
Receive and reply
Individual Call is one to one calling including two types. 1)
Carry on Transceiver
Ready to call immediately
When your transceiver
green. You can only select one type to set in to the transceiver
When Receiving a Individual Call:
LED indicator
2 Hold the transceiver
1—2inches(2.5-5 Ocm) away from mouth
3 Press PTT key to respond
4 Release PTT key to receive
to Zone 2 in this transceiver.
tone, means Zone 2 has been returned
channel,
selector
talk group ID or user ID number.
Call
When transmit
receiving message,
to that group
vertically
the call, LED indicator
Individual
existence
has been chosen, LED indicator turns
turns green
vertically
to the call, LED indicator
talk group
buttons to select the represen-
transceiver,
the LED indicator
and keep about
Call
detection before calling;
and keep about
09
Or you will
to Zone
ID or user ID
LED indicator
turns
must be
turns red.
2)
turns red