Retevis RT43 Bedienungsanleitung Seite 6

Insert the top part of the battery pack into the top 2 slots of the
transceiver and then button the bottom's buckle
To remove the battery pack, make sure the transceiver has
been turned off, and then open the bottom's buckle,Remove
battery when the batter pops up. (2)
Install Antenna
Hold the base of antenna,
top of transceiver clockwise. (3)
Install/Remove
If necessary, install the supplied screws into the belt clip at the back
of battery pack for easy carry.
To remove the belt clip, directly remove the two screws only. (4)
Install Hand Strap
Install the hand strap at the middle circle of the transceiver. (5)
(3)
(1)
rotate it tightly into the connector
Belt Clip
(4)
04
(I)
the
(2)
of the
(5)