Retevis RT43 Bedienungsanleitung Seite 10

each zone has 16 channels,
selected by pre-programmed
Transmit
When going to transmit, press PTT
key, keep microphone
your mouth about
in your usual tone
Receiving
Release the PTT key to receive
Adjust the suitable
best receiving result.
Function Specification
LED indicator
LED indicator shows transceiver's
indicates the transceiver
Green light indicates
or is receiving non-encrypted
activity
Call (PTT) key
Each channel in this transceiver
When in transmitting,
signals to other transceivers
Press PTT to transmit
phone will be activated
Receive and
Zone Selection
The zone is a group of channels The transceiver supports at
most two zones,
1. Press the key pre-programmed
2. You will hear a "confirmed"
Zone 1 and Zone 2 can be
key
away from
3-4cm, and speak
volume to get the
is transmitting
the transceiver
signal or data, or is detecting
press PTT key continuous
continuously
and release
by pressing
Transmit Call
and each zone
tone, this is to confirm
08
working status. Red light
is on process
can be set into a digital
PTT to receive.
PTT
is not more than
of power on
air
channel
will transmit
The micro-
16 channels
that Zone