Foster Infinito Gebrauchs- Und Installationsanweisung Seite 89

Connection of the hob
Setting up the configurations:
For the various kinds of connection, use the brass bridges which are in the box next the terminal.
Monophase 220-240V~ 1P+N
Put a bridge between terminals 1and 2, between 2 and 3, and between terminals 4 and 5.
Attach the ground to the terminal "ground", the neutral N to terminal 4, the Phase L1 to the
terminals 1.
Biphase 400V~ 2P+N
Put a bridge between terminals 2 and 3, and between terminals 4 and 5.
Attach the ground to the terminal "ground", the neutral N to terminal 4, the Phase L1 to the
terminals 1 and the Phase L2 to the terminal 2.
Triphase 400V~ 3P+N
Put a bridge between terminals 4 and 5
Attach the ground to the terminal "ground", the neutral N to terminal 4, the Phase L1 to the
terminals 1, the Phase L2 to the terminal 2 and the Phase L3 to the terminal 3.
Caution! Be careful that the cables are correctly engaged and tightened.
We cannot be held responsible for any incident resulting from incorrect connection or which could
arise from the use of an appliance which has not been grounded or has been equipped with a
faulty ground connection.
89