Residual Heat Indication; Booster Function; Power Management - Foster Infinito Gebrauchs- Und Installationsanweisung

Residual heat indication

After the switching off of a heating zone or the complete stop of the hob, the heating zones are still hot and
indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don't touch the heating zones and don't put any heat sensitive object
on them. There are risks of burn and fire.

Booster function

The Booster function [ B ] add a booster power to the selected heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra-high Booster.
Booster is useful for example to heat up rapidly big quantities of water for rice, pasta or noodles etc.
• Start-up / Stop the booster function:
Action
Pan selection
Start up the Booster
Stop the Booster

• Power management:

The Power Management prevents the mains connection from
overloading.
The Power Management is prioritizing, e.g. the pan with the last
increased power level, will get the desired power level. Another
pan that is put on the same induction coil will be reduced in its
power if the total power request of the two pans exceeds 3.7 kW.
In that case you hear an acoustic feedback and the power level
of the pan will be reduced to the maximum possible power:
Heating zone selected The other heating zone: (example: level 9)
[ B ] is displayed
Control panel
Select the desired zone
Slide on the "SLIDER" to [ B ]
Slide on the "SLIDER"
[ 9 ] goes to [ 6 ] or [ 8 ] depending on the type of pan
Display
[ 0 ]
[ B ]
[ 9 ] to [ 0 ]
70