Foster Infinito Gebrauchs- Und Installationsanweisung Seite 82

•
Case 3:
Pan is put on an induction coil which is in operation already.
The pan with power level [ 9 ] is heated with induction coil 2, 4, 5 and 7.
If another pan (without power) is put on induction coils 3 and 4, then a conflict arises on induction coil 4.
Induction coil 4 may no longer supply any power now, because the power level requirement of the pan that was put
on the hob last, is [ 0 ].
•
Solution 3:
o
Set a power level for the pan that was put on the hob last.
o
Move the pan to another position on the hob.
82