Sytem Power Limit - Foster Infinito Gebrauchs- Und Installationsanweisung

Sytem power limit

The factory default setting is 11.0 kW full power. The power of the hob can be limited. It can be set from 2.4kW to
11.0kW, in 100W steps.
Here's how to access this setting:
A. Disconnect the hob from the electrical network.
B. Connect the hob to electrical network and consider that the configuration setting has to be made in a
maximum time of 2 minutes.
C. Do not press the On/Off
D. Perform the following operation once the clock indicating "12:00" is displayed on the screen.
E. Press the On/Off key [
- Press the On/Off key
o
Less than one second must elapse between each press.
- The 4th time, press and hold the on/off key
The "Service Menu" appears on the screen
o
- Release the key
A double " BIP " indicates that the procedure has failed (time exceeded in the selection of keys, ...). In this
case the procedure must be repeated in step D (or A if necessary).
F. The "Service Menu" appears as shown below, select the setting "System power":
G. You can select the desired value, with power adjustable in 100W steps.
Confirm the settings by pressing the "validate" key at the bottom right.
To exit the menu without modification, press the cross in the upper right corner.
[ ]
key in a first step.
] 4 times:
[ ]
(short press) three times in a row,
[ ] (long press)
until you hear a long "BEEP".
79