Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using the appliance
Switching the appliance on and off
1) Using the control dial "Temperature" 9, set the desired temperature . You
can set the temperature in 1°C steps . A signal tone sounds for every 5°C .
The set temperature appears in the display indicator "Set Temperature" 7 .
2) Using the control dial "Minutes" 3 set the desired cooking time in minutes .
You can set the time in 1 minute steps . A signal tone sounds for every
5 minutes . The set time appears in the display indicator "Minutes" 5 .
NOTICE
►
The background lighting of the display goes out after about 5 minutes
after the last activation of one of the dials if you do not start the heating
process . The settings on the display remain visible . Turning one of the
dials will reactivate the background lighting in the display .
3) Press the START/STOP 9 heating button . The heating begins . The heating
progress in indicated through the continous beam "
heating temperature is shown in the display indicator " Current Temperature" 6 .
Once the heating up is complete, signal tones sound, "
display and the time set in the display indicator "Minutes" 5 begins to
count down .
NOTICE
►
The background lighting in the display remains switched on while the
appliance is working .
As soon as the set time period has expired, signal tones sound . The appliance
switches itself off . „
NOTICE
►
To stop a heating process or a boiling process, press the heating START/
STOP 9 button .
4) When the appliance is not in use, ALWAYS remove the plug from the mains
power socket .
■
34
│
GB │ MT
" and „
" extinguish in the display .
" . The momentary
" appears in the
SEAD 1800 A1
Werbung
