Ryobi RBC30SBSA Bedienungsanleitung Seite 23

EN
FR DE ES IT PT NL
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORISED SERVICE DEALER.
PROBLEM
Grass wraps round shaft
housing and string head.
Bump knob hard to turn.
Lubricant drips from muffler.
NOTE: If your unit exhibits specifi c performance problem(s) where the Troubleshooting section recommends a clockwise screw
adjustment on the carburetor and no adjustments have been made since original purchase, the unit should be taken to an au-
thorized service center for repair. In most cases, the needed adjustment is a simple task for the trained service representative.
960649002-03.indd 20 960649002-03.indd 20
All manuals and user guides at all-guidesbox.com
SV DA NO FI HU CS RU
English
TROUBLESHOOTING
POSSIBLE CAUSE SOLUTION
1. Cutting tall grass at 1. Cut tall grass from the top down.
ground level.
2. Operating trimmer at 2. Operate trimmer at full throttle.
part throttle.
Screws threads dirty or Clean threads and lubricate with grease - if no
damaged. improvement, replace bump knob.
1. Operating trimmer at 1. Operate trimmer at full throttle.
part throttle.
2. Check lubricant/fuel mixture. 2. Use fresh fuel and the correct synthetic 2-stroke lubricant mix.
3. Air filter dirty. 3. Clean per instruction in Maintenance Section.
20
RO PL SL HR ET LT LV SK BG
2011/6/3 2011/6/3 3:31 3:31