Service - Panasonic ES-ST25 Bedienungsanleitung

Problem
Makes a loud sound.
The driving sound
changes while shaving.
The power will not
switch to OFF.
The shaver cannot be
charged.
18
Action
Apply oil.
Confirm that the blades are
properly attached.
The shaver can be loud due to
the linear motor. This does not
indicate a problem.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard thickness.
Press the power switch twice
while using in the shaving
sensor mode.
Push the main body into the
charging stand all the way and
make sure the charge status
lamp glows.
Gently wipe the side terminals
and the charging terminals of
the charging stand with a cloth
or tissue damped with water.
The recommended temperature
for charging is 10 – 35 °C. If
charged at a temperature other
than the recommended
temperature, the shaver may
take longer to charge or may
not charge at all.
Problem
Operating time is short
even after charging.
Shaver stopped
functioning.

Service

Contact
Please visit Panasonic web site http://panasonic.net or contact
an authorized service center (you find its contact address in
the pan european guarantee leaflet.) if you need information
or if the shaver or the cord gets damaged.
Action
Apply oil.
When the number of operations
per charge starts to decrease,
the battery is nearing the end of
its life.
Recommended ambient
temperature for operation is
5 – 35 °C. The shaver may stop
functioning when out of
recommended ambient
temperature range.
The battery has reached the
end of its life.