Panasonic ES-ST25 Bedienungsanleitung Seite 17

Problem
The shaver cannot be
properly cleaned even
after water is poured
from the water inlet.
The blades do not dry.
The odor is getting
stronger.
You do not get as close
a shave as before.
Action
When the shaver is very dirty,
first use the cleaning brush to
remove beard trimmings.
Or, remove the foil frame and
wash with water.
(See page 14.)
The blades may not dry quickly
due to temperature conditions.
The blades can be dried more
easily by removing for drying.
This can be improved by
cleaning every time after shaving.
Apply oil.
This can be improved by
cleaning every time after shaving.
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Problem
The shaving sensor
does not respond.
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Action
Depending on the beard
thickness, the shaving sensor
may not react and the driving
sound may not change. This is
not abnormal.
The shaving sensor may not
respond depending on the
thickness of the beard or the
type of the shaving gel, but this
is normal.
Apply oil. The shaving sensor
may not respond when there is
not enough oil on the blades.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 14.)
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
17