Using The Shaver - Panasonic ES-ST25 Bedienungsanleitung

After charging is
While charging
completed
The charge The charge
status lamp ( ) status lamp (
glows red. turns off.
• After charging is completed, turning the power switch ON
with the shaver plugged in will cause charge status lamp to
light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
The charge status lamp (
when there is a problem with charging.
Charge the shaver within the recommended ambient
temperature range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp
( ) may not glow. It will eventually glow if kept connected.
4
4
Disconnect the adaptor [B] after charging is
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
12
Abnormal
charging
The charge
status lamp (
)
will blink twice
every second.
) will blink twice every second

Using the shaver

1
1
Press the power switch [A7] to select the
desired shaving mode.
• Each time you press the power switch, the shaving
mode changes from "Shaving sensor mode"
mode" "OFF."
) Shaving sensor
mode
Beard thickness is
automatically
sensed and the
power is
automatically
adjusted when
shaving.
The shaving
sensor lamp (
glows blue.
Normal mode
The power level is
constantly
maintained while
shaving.
The shaving The shaving
sensor lamp ( ) sensor lamp (
)
turns off. turns off.
"Normal
OFF
—
)