Dantherm MASTER BLP 11 Benutzer- Und Wartungshandbuch Seite 18

HEATER: There
•
en
deformations, cracks or rust. All parts of the
it
heater must be present and correctly installed
as per the original configuration. The heater
de
must not make any abnormal noises during
operation. The power cable, pushbutton control
es
panel, lifting handle and protective grids must
fr
be intact and well-preserved. If these conditions
are not met, contact the service centre and
nl
describe the problem for support.
• LIQUID GAS FLEXIBLE HOSE: The gas hose
pt
(length 1,5 m; EN 16436-1 - class 2 - 6,3 mm -
da
10 bar; EN 16436-2) must be undamaged and
well-preserved. It must not be visibly crushed,
fi
torn or deformed. Thread connections must be
no
intact and not deformed. There must be no dust
deposits or obstructions. If you think you need to
sv
change the gas hose, contact the service centre
with the product code and serial number of the
pl
heater in order to receive a new original spare
ru
part.
• GAS PRESSURE REGULATOR: The gas
cs
pressure regulator must be intact and well
preserved. Thread connections must be intact
hu
and not deformed. There must be no dust
sl
deposits or obstructions. If you think you need
to change the gas pressure regulator, please
tr
contact the service centre with the product
hr
code and serial number of the heater in order to
receive a new original spare part.
lt
►11.4.Do not carry out any unauthorised
maintenance.
lv
et
ro
►►12. CONNECTING THE ROOM
THERMOSTAT (...ET) (optional)
sk
Remove the plug connected to the appliance
bg
and connect the room thermostat (optional)
(Pic. 30).
uk
See wiring diagram (...ET).
bs
el
zh
must be no dents,