Specific Safety Warnings - Vevor Rp8628 Bedienungsanleitung

moving parts, binding of moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced by an authorized service center. Following
this rule will reduce the risk of shock, fire, or serious injury.
Inspect power tool cord periodically and, if damaged, it must be replaced only

by the manufacturer or by an authorized service center to avoid risk. Following this
rule will reduce the risk of electric shock or fire.
Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY WARNINGS

AWARNING
DANGERGER
!D!
To reduce the risk of fire or explosion:
Fumes from solvent and paint are flammable and may ignite or explode. Use

only in a well-ventilated area and allow fresh air to move through the work area. Keep the
pump well-ventilated and do not spray the pump assembly.
Sprayer generates sparks. When flammable liquid is used in or near the sprayer or

for flushing or cleaning, keep sprayer at least 20 feet (6 m) away from explosive
This sprayer is not intended for use with flammable or combustible
materials used in industrial or fixed location applications such as
factories or paint shops. Follow all applicable federal, state, or
provincial regulations and comply to NFPA 33 and OSHA
requirements if used in these applications.Follow all applicable
federal, state, or provincial regulations and comply to NFPA 33 and
OSHA requirements if used in these applications.
FIRE SFIRE SAFETYAFETY
- 7 -