Knauer WellChrom HPLC-Pump K-501 Bedienungsanleitung Seite 4

4
Using this manual
This manual refer to the WellChrom HPLC pump K-501 .
Conventions in this manual
The captions used in this manual referring to the figures are identified with
square brackets like: see 3 in Fig. X on page Y.
Cursor right: ► up: ▲
SOP´s in this manual
The Standard Operating Procedures (SOP) provided with this manual offer a
convenient way of structuring complex tasks in the operation of your HPLC
pump. They include step-by-step instructions leading the user through all
routine tasks during operation. They can be used for documentation purposes
and be copied, applied signed, and filed in order to document the performance
of the instrument.
!
IMPORTANT
Table 1 List of SOP´s in this manual
SOP 1 Connection of eluent tubings
SOP 2 Activating the PURGE function
SOP 3 Correction the pressure offset
SOP 4 Offset correction of the analog input
SOP 5 Calibration of the analog input
SOP 6 Connecting Plug Strips
SOP 7 Piston backflushing
SOP 8 Removing the pump head
SOP 9 Removing and checking piston rods
SOP 10 Disassembling the pump head
SOP 11 Assembling the pump head
SOP 12 Installing the pump head
SOP 13 Replacing check valves
SOP 14 Cleaning check valves
Please operate the instrument and all accessories
according to instructions and SOP´s in this manual.
This ensures proper results and longevity of your
equipment.
Using this manual
down: ▼ left: ◄.
page
10
13
15
15
15
18
21
21
22
22
24
25
25
25