Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-32
Troubleshooting table
Problem
Possible cause
Appliance is mak-
Operating noises are func-
ing a noise.
tional and are not a sign of
malfunction.
Disturbing noises.
Odours in the
Poorly packaged or
appliance
spoiled food in the
appliance.
Interior lighting off. LED light source defective. Contact our Service department (see
Doors do not close
The door is jammed by
correctly.
food packaging. Too much
food has been placed in-
side.
The fridge is tilted.
Lots of condensa-
The appliance doors do
tion in the refriger-
not close well or the door
ator area.
seals do not work properly.
Error messages
If one of the following error messages appears on the display, please contact our service depart-
ment (see page EN-33):
Error code
Error description
E1
Temperature sensor error in fridge
E2
Temperature sensor error in freezer
E3
Temperature sensor error in the Variable zone
E5
Defrost sensor error in the freezer
E6
Communication error
E7
Error involving the sensor for monitoring temperature circulation
EH
Moisture sensor error
Solutions, tips, explanations
Humming: Refrigeration unit is running.
Flowing noise: Refrigerant is flowing through
the pipes.
Clicking: Compressor is switching on or off.
Check that it is stable.
Remove any objects from the appliance.
Remove any foreign matter from the back of
the appliance.
Pack odour-intensive foods well.
Check if there is any spoiled food in the
appliance.
Clean the inside of the appliance.
page EN-33).
Make sure that the food does not hit the
door.
Make sure that the appliance is set up
and aligned correctly (see "Start-up" on
page EN-11).
Check the door and door seals to ensure
they are in good condition (see "Checking
and cleaning door seals" on page EN-27).
Werbung
