hanseatic HCD18983CWDI Gebrauchsanleitung Seite 66

(41)
(15)
3. Remove the two brackets (41) holding the
water tank lid (42), and take off the water
tank lid.
4. Remove the outlet valve (43). If necessa-
ry, use a slotted screwdriver or a knife to
do this.
5. Wash the water tank, the water tank lid,
and the closure cap with warm, soapy wa-
ter. Then rinse them well with clean water.
Care and maintenance
(42)
6. Setzen Sie den Wassertank (15) wieder
zusammen.
7. Always check whether the seal (39) is
correctly reinserted: Place the seal, large
opening first, onto the tank outlet (40) until
it is securely fastened.
(43)
8. Disassemble the outlet valve. To do this,
pull the outlet valve holder (38) and the
outlet (44).
9. Wash the individual parts of the outlet
valve with warm, soapy water. Then rinse
them well with clean water.
10. Reassemble the outlet valve.
11. Re-insert the reassembled outlet valve.
12. Place the water tank back in the holder in
the fridge door.
Page EN-29
(40)
(39)
(38)
(38)
(44)
(44)