Transmitter Functions; Iveo Initial Operation/Setting By Radio - Selve Se Pro 2/20-Rc Betriebsanleitung

EN iveo initial operation/Setting by radio

6.3. Transmitter functions

The transmitter and receiver are in operating mode.
Intermediate positions
For setting and calling the intermediate positions, see the transmitter instructions.
Deleting the receiver list in the transmitter
To delete the receiver lists from a transmitter, push the SELECT and PROG buttons at
the same time for 9 seconds. Then all receivers are deleted from the transmitter.
9 s

7. iveo initial operation/Setting by radio

iveo initial operation
The iveo initial operation is possible using any iveo transmitter which has UP, STOP
and DOWN buttons.
62