Blanco FWD Lite Montage- Und Bedienungsanleitung Seite 14

eng
18
19
20
22
21
14
19d
20
21
20
21
Undo the hose nut (19d) on the pneumatic
switch/air switch. Push the nut onto the
air hose (20).
Connect the air hose (20) to the pneumatic
switch/air switch (19) from below
and secure it against slipping out with the
hose nut (19d)
Connect the other end of the air hose (20) to the
switch box (21) and secure the hose with the
hose nut as described in Step 18.
Now insert the switch box (21) mains plug (22)
into the socket outlet.
Put the disposer into operation as described in
the following chapter, Initial Start-Up. To fi nish
off, check all hose and pipe connections and
the sink drain for any leaks.