Werbung
Verfügbare Sprachen
Verfügbare Sprachen
15
16
CAUTION – damage | CAUTION – warning of electrical voltage
Cables and pipes must be laid in such a way that they cannot be damaged. If a cable, plug,
switch box, pneumatic switch/air switch or its line is damaged, contact BLANCO Customer
Service (see Section 1. a for contact details) or your contractual partner/specialist retailer.
17
19
19a
19b
19c
23
14
21
22
Fit the switch box (21) with three screws (23)
on the side wall of the base cabinet within
reach of a socket outlet as shown.
Make sure that the cables and lines enter
21
the switch box from below.
Connect the disposer plug (14) to the switch
box (21) but do not connect the mains plug
(22) itself to the socket outlet yet.
Remove the fastening nut (19c) and the seal ring
(19b) from the pneumatic switch/air switch.
Screw the pneumatic switch/air switch (19) into
the existing hole for a tap in your sink or worktop
or drill a new hole measuring 35 mm in diameter.
In doing so, ensure that the rubber seal (19a) is in
the correct position.
eng
13
Werbung
