Normal Weighing Mode; Setting Mode; Parameter Setting - Lifter Py 20 Bedienungs- Und Wartungshandbuch

Guide to the operation keys
An operation without any particular specification refers to short presses on the keys.
Key symbol
Holds the weight value on the display
Short press
Long press
Accumulation key
Short press
Long press
weight.
Unit conversion key
Short press
weight.
The indicator lamp corresponding to the unit lights up.
Gross weight key
Short press
lamp indicating "Net" weight turns off.
Tare removal key
Short press
The lamp indicating "Net" weight lights up. Perform the tare
removal operation multiple times.
Reset key
In gross weight mode, it resets the weight. When the scale
is in net weight mode, saving mode and out of the reset
range, the resetting operation is invalid.
Short press
Long press
17.

PARAMETER SETTING

Entering the setting:
Press the [Hold] button on the operating panel in normal weighing mode.
If F1. 14

Normal weighing mode

→
F2.1 = 1, hold/cancel.
F2.1 = 2, switch between percentage and
weight.
F2.1 = 5, switch between quantity and weight.
→
to enter the settings menu.
→
F2.1 = 4, include the displayed weight in the
accumulated value.
→
F2.1 = 3, select scale to sample target
F2.1 = 4, accumulate the weight on the scale's
display.
F2.1 = 5, count sample on the scale.
→
in weighing mode, it switches the unit of
→
net weight switches to gross weight; the
→
gross weight switches to net weight.
→
start-up.
→
shutdown.
= 0, you can set all parameters within the range F1~F5.
11

Setting mode

Return to the last
menu.
No definition.
The flickering icon is
on the left.
The flickering icon is
on the right.
The flickering digit
decreases.
In setting mode, the
flickering digit
increases. In display
adjustment mode, the
accumulated weight is
cleared.
Confirm operation to
save the entered data.