lifter PY 20 Bedienungs- Und Wartungshandbuch Seite 13

F1.11 Digital Filter
Selectable parameters: 0 --- Mild Filtering
F1.12 Steady Range
F1.13 Overload Display Range
F1.14 F1 Menu Lock
F1.15 Restoring the Default Settings
Set the parameters within the F1~F4 range as the default parameters, which will not impact the
parameters of standard scale.
F2 Application Function Setting
F2.1 Function Selection
Selectable Parameters: 0 Close the application functions (default value)
F2.2 Empty-scale threshold value
Selectable Parameters: 0~ full range (default value: 0.001)
F2.3 Target Weight for Weight Checking and Sorting
Selectable Parameters: 0~ full range (default value: 2.000)
F2.4 Positive Error for Weight Checking and Sorting
Selectable Parameters: 0~ full range (default value: 0.100)
F2.5 Negative Error for Weight Checking and Sorting
Selectable Parameters: 0~ full range (default value: 0.100)
F2.6 Access to Target Weight for Weight Checking and Sorting, and Counting Sample Weight
Selectable Parameters: 0 --- Access to Platform Weighing (default value)
F3 Energy-saving Parameter Setting
F3.1 Time-out Screensaver Time Setting
Selectable Parameters: 0~99 minutes, (default value: 30 minutes)
If set to 0, this function will not be allowed.
During the screen protection mode, the display will randomly show ""
F3.2 Energy-saving Time Setting for Auto Power-off
Settable Parameters: 0~250 minutes, (default value: 150 minutes)
Selectable parameters: 1 d, 2 d, 3 d (default value)
Selectable Parameters: 9d, 5% (default value), 10%, 20%
Selectable Parameters: 0 --- Enter the F1 menu through the keyboard
1 --- Weight keeping function
2 --- Percentage display function
3 --- Weight checking and sorting function
4 --- Accumulative scale function
5 --- Counting scale function
1 --- Access to Manual Entry
1 --- Moderate Filtering (default value)
2 --- Severe Filtering
1 --- Enter the F1 menu by pressing the calibration button
13