Main Functions - Lifter Py 20 Bedienungs- Und Wartungshandbuch

13. SPECIFICATIONS
• Liquid crystals display, 6 digits 25mm, 7-state indicator lamps. Long service life and high shock
resistance
7 function keys. Simple and user-friendly operation
•
• Protection rating: IP5x
• Excitation voltage: +5 VDC
• Load capacity of sensor: at most 4 x 350 Ω
Input signal range of null point: 0-5 mV
•
• Input signal range of full scale: 1-10 mV
• Internal resolution: 1 million
• Weight upgrading rate: 40 times per second
• Power supply mode
Battery: 6 V, 4 Ah
Adapter: voltage 100-240 VAC
• 2 x RS232 ports
• Operating temperature: -10°C to 40°C, with relative humidity below 85 %
• Storage temperature: -20°C to +60°C, with relative humidity below 85 %
Conforms to the following standard: GB/T 7724-1999
•
14.

MAIN FUNCTIONS

• Basic weighing function: resetting, tare removal and tare clearing
• Weight detection, counting
• Weight keeping function, weight accumulation function, percentage display
• Redundant back-up of parameters
• Automatic screen protection and automatic energy-saving shutdown
• Rich communication protocol
15. BOUNDARY DIMENSIONS
Instrument size: illustrated in the figure below (mm); instrument weight: 1.5 kg
Before wiring the controller, make sure you shut off the power supply. Wait
30 seconds before powering up the controller the second time.
Beware of static electricity
The controller is sensitive to static electricity, so take the necessary
precautions during use and maintenance to avoid static shocks
Current 0.1 A Frequency 50-60 Hz
9
.