Configuring Newly Taught-In Devices; Operation - HomeMatic HM-RC-8 Bedienungsanleitung

Start-up
• Now configure the newly taught-in devices in the
inbox as described in the next section ("Configuring
newly taught-in devices").
5.3 C onfiguring newly taught-in devices
Once you have taught-in your device to the HomeMatic
Central Control Unit, it is moved to the inbox. Here, you
must configure the device and its associated channels
in order to make them available for operating and con-
figuration tasks. Give the device a name and assign
it to a room. You can also make individual parameter
settings.
Now you can use the "WebUI" user interface to control
your device, configure it, link it directly to other devices,
or use it in central control unit programs. Please refer
to the HomeMatic WebUI Manual for more details (you
can find this in the „Downloads" area of the website
www.homematic.com).
44
6

Operation

In the factory settings, the 8 buttons are defined as
three separate button pairs (BP 1, BP 2, BP 3 and BP
4). The right buttons are defined for the functions „On/
Brighter/Up", the left buttons for the functions „Off/Dark-
er/Down". With the remote control you can
• switch lights on and off
• dim lights brighter or darker
• move shutters up or down.
Example:
Shutters down
Operation
Light on
45