x-sense XS01 Gebrauchsanweisung Seite 6

Alarm Test
The alarm must be properly attached to the mounting bracket before It can be
tested.
1 Press the test button.
2.The unit beeps 3 times.
3,The red LEDwill flash once uery second during the audible signal,
NOTE:Thetest function occurote/y tests the alarm's smoke sensingcircuit without the
needof testsmoke./f your smoke a/orm fails to give an oudib/e test signal,please refer
immediatelyto the troubleshooting guide at the end ofthis manual
LED Indicator and Audible
LED indicator
Status
Normal Red LEDflashes once every 60 seconds.
Test Red LEDflashes once every second.
Red LEDflashes once every second.
Alarm
Silence Mode Red LEDflashes once every 5 seconds.
Low Battery Red LEDflashes once every 60 seconds.
Malfunction Red LEDtlashes twice every 40 seconds.
Alarm
Audible alarm
None
3 short quick beeps
Short quick beeps
None
1 beep every 60 seconds
2 beeps every 40 seconds