x-sense XS01 Gebrauchsanweisung Seite 3

non-emergency smoke (e.g.steam) causes nuisance alarms,The red light flashes
every 5 seconds to remind you that the smoke alarm has been silenced. Pressthe
test/silence button to exit the silence mode or wait 9 minutes for the alarm to
automatically exit the silence mode.
• Loud 85 Decibel Piezo Electric Alarm
The alarm automatically resetswhen a hazardous condition has passed,
Package Contents
1 x Alarm Unit 1 x Mounting Bracket
2 x Anchor Plugs 1 x User Manual
Safety Information
A IMPORTANT!
I DANGERS, WARNINGS, AND CAUTIONS ALERT YOU TO IMPORTANT
OPERATING
PAY SPECIAL ATTENTION
2. THIS ALARM
THE
THE SMOKE ALARM,
3. FIRESIN CHIMNEYS, WALLS, ROOFS, DIFFERENT LEVELSOR BEHIND
CLOSED
4 THIS DEVICE DOES NOT DETECT FLAMES, HEAT, CARBON MONOXIDE OR
OTHER HAZARDOUS
A WARNING!
2 x Screws
I NEVER IGNORE
INJURY OR DEATH.
2. THE SILENCE FEATURE IS ONLY FOR YOUR CONVENIENCE
CORRECT A PROBLEM
PROBLEM
OR DEATH,
3. TEST THIS SMOKE ALARM
CORRECTLY,REPLACE IT IMMEDIATELY! IFTHE ALARM CANNOT WORK PROPERLY,
IT WILL NOT ALERT YOUTO
INSTRUCTIONS OR TO POTENTIALLY
TO THESE SITUATIONS.
IS NOT INTENDEDTO ALERT HEARING
USE OF ALCOHOL OR DRUGS MAY ALSO IMPAIR ONE'S ABILITY TO HEAR
DOORS MIGHT NOT BE DETECTED
GASES.
ANY ALARM. FAILURE TO RESPOND
A WAYS CHECK YOUR HOME
AFTER ANY ALARM. FAILURE TO DO SO CAN RESULT IN INJURY
ONCE A WEEK. IF THE ALARM
A PROBLEM.
HAZARDOUS SITUATIONS.
IMPAIRED INDIVIDUALS.
CAN RESULT IN SERIOUS
AND WILL NOT
FOR A POTENTIAL
EVER FAILS TOTEST