Operating The Emp4 Eco - schwa-medico 101707 Gebrauchsanweisung

Connecting the Cables
and the Electrodes
Switching ON
the EMP4 ECO +
Selecting a Program
Starting the Stimulation
Setting the Intensity
schwa-medico OPErATING MANuAL - EMP 4 ECO+

Operating the EMP4 ECO +

Connect the electrodes with the cable(s) (always 2 electrodes per
cable). Connect the cables to the EMP4 ECO + on sockets no. 6. Place
the electrodes on the desired area (see electrode placement)
Switch the commutator (no. 8) to the ON position. Press the
start the device. The program shown on the display is the last program
used. The device automatically switches off after 2 minutes of disuse.
If the display shows a key symbol on the upper left side, the EMP4
ECO + has previously locked a specific program (see chapter locking
the key pad).
Ensure that the EMP4 ECO + has not been locked on one program.
Select a program by pressing the P key. To scroll through the programs,
press the P key as often as necessary until you have selected the pro-
gram of your choice. To return to the previous program, press one of
the keys.
First check if you have selected the right program and if cables and
electrodes are well connected and well positioned on the skin. Start
the stimulation by increasing the intensity with the
channel(s) connected to the electrodes.
Adjust the intensity of the channels
left and keys.
Adjust the intensity of the channels
the right and keys.
Increase the intensity with the
Decrease the intensity with the
(black) and (red) by using the
(grey) and (yellow) by using
keys.
keys.
41
key to
key of the