Lionelo Astrid i-Size Base Bedienungsanleitung Seite 6

8.
The plastic parts of this seat can heat up in the sun and cause burns on the
child's skin.
9.
Never leave a child alone in the car seat in a vehicle.
10. Luggage and other similar items should be secured so that they will not cause any injury
in a collision situation.
11. Do not use the seat without its fabric cover.
12. The cover cannot be replaced with an item from another set. It is an integral part of the
set and affects the operation of the restraint.
13. Always have this instruction manual with you.
14. Refer to the vehicle manufacturer's owner's manual.
DESCRIPTION OF PARTS (FIG. B)
1.
Stabilization leg
2.
Seat release button
3.
Seat mounting brackets
4.
Base
5.
ISOFIX connectors
6.
ISOFIX connector release button
7.
Extendable part of the stabilization leg
8.
Stabilization leg adjustment button
9.
Ground contact indicator
10. Seat installation indicator
INSTALLATION OF THE BASE IN A CAR
1.
Extend the stabilization leg (fig. 1).
2.
Place the base on the couch of the car.
3.
Push in the sliding lever and slide out the ISOFIX arms (7, fig. B). Anchor the ISOFIX
arms to the attachments located in the car's bench seat (fig. 2). The arms will interlock
and you will hear a characteristic click. The green indicator on the ISOFIX button must
be visible on both sides of the seat (fig. 3).
4.
Make sure the base is pressed firmly against the back of the car's bench seat (fig. 4).
Push the base using a left-right motion toward the vehicle seat back until it is completely
aligned with the backrest.
5.
Press the stabilization leg adjustment button. Its pull-out part should slide out automatically
(A, fig. 5).
EN ‑ 6 ‑