Lionelo Astrid i-Size Base Bedienungsanleitung Seite 5

Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate
to contact us: help@lionelo.com
Producer:
BrandLine Group Sp. z o. o.
A. Kręglewskiego 1, 61-248 Poznań, Poland
The product meets the requirements of the standard: R129/03.
The product is compatible with the ASTRID I-SIZE seat. For information on how to install the
ASTRID I-SIZE, please refer to the instruction manual supplied with the seat.
Note! Never install the seat in a location with the front airbag activated (fig. A).
NOTICE
This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No
129, for use in, i-Size compatible vehicle seating positions as indicated by vehicle manufacturers
in the vehicle users' manual.
If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.
WARNINGS:
1.
The product is designed for children from birth to reach a weight of 13 kg and with a
height between 40 and 87 cm.
2.
Rigid items and plastic parts of an Enhanced Child Restraint System shall be so located
and installed that they are not liable, during everyday use of the vehicle, to become
trapped by a movable seat or in a door of the vehicle.
3.
Any seat belts that restrain a child must be well-fitted to the child's body structure. The
belts must not be twisted.
4.
The straps securing the restraint to the vehicle must be tight, the stabilization leg must
be in contact with the ground of the car.
5.
Make sure the lap belts run low to adequately secure the pelvis.
6.
If the product has been exposed to strong elements (such as impact), it should be replaced.
7.
Do not make any changes to the seat or add new components without approval from
the approval authority. To ensure maximum safety for the child, the equipment should
be attached and used as recommended in the instruction manual.
‑ 5 ‑
EN
EN