Lionelo Astrid i-Size Base Bedienungsanleitung Seite 7

6.
Adjust the leg height so that the foot meets resistance from the vehicle floor. Now you
can release the button.
7.
Make sure the ground contact indicators are green (B, fig. 5) and the leg is touching the
ground of the car and is not crooked.
NOTE! Never mount the foot from the support leg on the glove box in the floor of the car.
If in doubt, consult your vehicle's owner's manual.
NOTE! The stabilization leg must not hang in the air, and no objects should be placed under it.
INSTALLATION OF THE SEAT ON THE BASE
Note! Make sure that there are no objects on the surface of the base and that the base is
properly installed on the car's couch.
1.
Place the seat on the base backwards (fig. 6). The correct placement will be signaled by
a click and a change in the color of the seat mounting indicator to green (fig. 7).
2.
Adjust the car seat handle to the car position (see the instruction manual that came with
the seat for more information on how to install the seat).
BASE REMOVAL
1.
Remove the seat from the base by pressing the seat release button (2, fig. B). The seat
mounting indicator will turn red.
2.
Press the stabilization leg adjustment button (9, fig. B), and then slide in its extension.
3.
Push in the ISOFIX sliding lever (20, fig. B) on both sides and disengage the ISOFIX arms.
The attachments will be released and the color of the ISOFIX indicators will change from
green to red. Retract the ISOFIX arms into the seat base by pressing the sliding lever.
4.
Fold the stabilization leg.
CLEANING AND MAINTENANCE
• Clean minor dirt with a damp sponge and a mild detergent.
• Plastic parts can be cleaned with a damp cloth and mild detergent.
• Note! Do not use strong detergents or bleaching agents.
Photos are for reference only, the actual appearance of the products may differ from that shown in the
photos.
‑ 7 ‑ EN