Technical Data - Meec Tools 019386 Bedienungsanleitung

EN
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the
purpose.
– Keep a firm grip on the handles/
grips.
– Maintain and lubricate the tool in
accordance with these instructions.
SYMBOLS
The following symbols can be of importance
for how you should use your power tool. Make
sure you understand the symbols and their
significance.
Read the instructions.
Wear safety glasses.
Wear ear protection.
Use a face mask.
This product has a safety
class II rating. This means it
is fitted with extra or double
insulation.
Approved according to current
EU directives.
Recycle as electrical waste.
8

TECHNICAL DATA

Rated voltage
Output
Speed
Sandpaper size
Cord length
Size
Sound pressure level, LpA 75.2 dB(A), K=3 dB(A)
Sound power level, LwA
Vibration level, a h
Always wear ear protection!
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 62841-2-4:2014.
WARNING!
The actual vibration and noise level when using
tools may differ from the specified maximum
value, depending on how the tool is used
and the material. It is therefore necessary to
determine which safety precautions are required
to protect the user, based on an estimate of
exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the
time when the tool is switched off and when it is
idling, in addition to the start-up time).
DESCRIPTION
Eccentric sander designed for sanding
wood, filler and metal. It has variable speed
control, velcro fastening of the sandpaper,
rubber coated grips and a dust collector. One
sandpaper included.
1. Power switch
2. Ventilation openings
3. Handle
230 V ~ 50 Hz
270 W
5000 – 12000 rpm
Ø 125 mm
2 m
L180 x W125 x H165 mm
86.2 dB(A), K=3 dB(A)
5.72 m/s², K=1.5 m/s²