HOMCOM W914-36F Bedienungsanleitung Seite 7

Step 3: Using four anchor screws and four washers, attach the mounting bracket to
the wall (see figure below).
Step 4: (1) Locate and remove the two mounting screws. (2) Pull the front cover
upwards to remove it (see figures below).
Fig. D (1)
Step 5: Mount the heater on the wall using the keyhole slots on the metal bracket,
which is on the back of the heater (see figure below).
Ensure the mounting bracket is securely engaged with the metal bracket at the
back of the heater.
Fig. C
Fig. E
6
Fig. D (2)