HOMCOM W914-36F Bedienungsanleitung Seite 11

: Press this button to enter standby mode – the indicator light will turn on.
Now, you can select the desired functions. Press the button again to turn
off the heater.
: Adjusting the time function:
- Press this button and the 'SUN' on the LED screen will start flashing.
- Use the ↑ and ↓buttons to select the desired date, then press + to
confirm. To cancel, press-.
- After setting the desired date, press ++ for the 'hour' position.
- Use + or - to select the desired hour.
- Press ++ for the 'minute' position.
- Use + or - to select the desired minute.
- Press either ++ or OK to complete the setting.
NOTE: If there is a power interruption, the date will automatically reset.
: Automatic time adjustment:
- Press this button and the time serial number will flash. The 'ON' on the
LED screen will light up.
- Use the + or - to select the desired serial number.
- Press ++ again – the 'SUN' on the LED screen will start flashing.
- Use ↑ or ↓ to select the desired date. Press + to confirm or - to cancel.
- After setting the desired date, press ++ for the 'hour' position.
- Press + or - to select the desired hour.
- Press ++ for the 'minute' position.
- Press + or - to select the desired minute.
- Press ++ again. The 'ON' will turn off and the 'OFF' will light up. Set the
shutdown time in the same way as before.
- Finally, set the temperature at which the heater will stop heating. Press
+ or - to select the desired temperature. Once the desired ambient
temperature is reached, the heater will automatically stop heating.
: Window detection function
- Press this button to turn on the 'window detection' function.
- If the room gets colder due to open windows or doors while the heater is
on, it will automatically stop heating to save energy.
- The corresponding icon on the screen will flash.
- Press the button again to turn off the 'window detection' function –
normal heating will resume.
: Reset function – press this button to clear the timing settings.
: Heating function – press this button to turn on the heating function.
Press again to turn it off.
: Timer function – press this button to turn on the timer function. Press
again to turn off.
Note: When using the timer function, the machine will work based on the
settings chosen before activating the timer. Adjust the desired settings,
activate the timer and the machine will adhere to these settings during the
specified period.
10