Scholtes FP E6.1 G S Bedienungsanleitung Seite 33

Programming the automatic cleaning end time
1. Press the button until the
numerical digits on the DISPLAY begin to flash.
2. Turn the SET TIME KNOB towards " " and " " to adjust
the hour value.
3. Press the button again so that the other two numerical
digits on the DISPLAY begin to flash.
4. Turn the SET TIME KNOB towards " " and " " to adjust
the minute value.
5. Press the button again to confirm.
6. When the set time has elapsed, the text END appears
on the display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy PYROLYTIC
cycle has been selected: default set duration 1 hour.
12:30 is scheduled as the end time. The programme will
start automatically at 11:30 a.m.
Programming has been completed when the
icons light up. The DISPLAY shows the PYROLITIC cycle
end time and duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven
has cooled down sufficiently before you can open the oven
door. You will notice some white dust deposits on the bottom
and the sides of your oven; remove these deposits with a
damp sponge once the oven has cooled down completely.
Alternatively, you can make use of the already heated oven,
in which case it is not necessary to remove the deposits,
they are completely harmless and will not affect your food
in any way.
icon and the two
and
GB
33