Sony ICF-SW7600G Bedienungsanleitung Seite 10

Scan Tuning
Frequency Range of the Auto Scan for Each Broadcast Band
STANOeV MEUOflV
TIMER STANOev
STANOet TIME SET
MEMORY PR§6ETOiRECT lUNE
oo©
000
000
Q 00
|(D
I
|(Q
I
MANUAL! ^
STANDBY h
KEY ENTER SCAN STOP A "
PROTECT TIME SET AM BAND / ^ P
O"' O (|)
5
1
Set POWER/LOCK to POWER.
2
Press ON/OFF.
The radio is turned on.
3
Receive a broadcast band
by way of direct tuning or manual
tuning. (Refer to the table on the next page for the frequency range
of each broadcast band.)
4
Keep pressing an outer MANUAL TUNE/SCAN START/
STANDBY TIME SET/TIME SET button (k^ or Oi) for about 2
seconds.
Scan tuning will begin within the frequency range.
When a station is received, the scanning will stop automatically for
about 2 seconds and the TUNE indicator lights.
5
Press SCAN STOP/AM BAND
to listen to the station being
received. The scan tuning stops and the station being received is
tuned in.
6 Tune in the station more precisely by inner buttons of
MANUAL TUNE/SCAN START/STANDBY TIME SET/TIME SET
(<?
or
■(>), if required.
7
Adjust VOLUME.
To turn off the radio, press ON/OFF.
Broadcast band Frequency range SW meter band
I
LW
153 kHz-522 kHz*'
—
MW
530 kHz-1620 kHz
(10 kHz step)
—
531 kHz - 1620 kHz
(9 kHz step)
—
2250 kHz-2550 kHz *2 120 meter band
3150 kHz-3450 kHz *2 90 meter band
3850 kHz - 4050 kHz 75 meter band
4700 kHz - 5100 kHz 60 meter band
5900 kHz - 6250 kHz 49 meter band
7100 kHz-7400 kHz 41 meter band
SW
9400 kHz-10000 kHz 31 meter band
11500 kHz-12150 kHz 25 meter band
13500 kHz-13900 kHz 22 meter band
15000 kHz-15700 kHz 19 meter band
17450 kHz-18000 kHz 16 meter band
21450 kHz-21950 kHz 13 meter band
25600 kHz-26100 kHz 11 meter band
76.00 MHz - 108.00 MHz*3
—
»1 153 - 285 kHz for the Italy model
»2 For the Italy model, these frequencies cannot be tuned in.
*3 87.50 - 108.00 MHz for the Italy model