So booten Sie das Betriebssystem Solaris
▼
●
Geben Sie an der Eingabeaufforderung ok den Befehl boot ein.
Sie müssen ein Ziel an den Festplattenpfad anfügen. Bei dem Ziel kann es sich um
Festplatte 0 (disk0), ein Gerät oder einen Netzwerkpfad handeln.
Im folgenden Beispiel wird der Server von Festplatte 0 (Null) gebootet.
CODE-BEISPIEL 3-3
ok boot disk0
Boot device: /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0
File and args:
Notice: Unimplemented procedure 'encode-unit' in
/pci@7c0/pci@0/pci@2/pci@0/LSILogic,sas@4
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,T1000/ufsboot
Loading: /platform/sun4v/ufsboot
....................
Hostname: wgs94-181
The system is coming up. Please wait.
NIS domain name is x.x.x.x
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of lo0 to 255.0.0.0
Setting netmask of bge0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4:
gateway xxxx
syslog service starting.
volume management starting.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
The system is ready.
wgs94-181 console login:
(Optional) So starten Sie das System neu
▼
●
Falls es erforderlich wird, das System neu zu starten, verwenden Sie dazu den
Befehl init 6.
# init 6
Hinweis – Schalten Sie das System nicht aus und wieder ein.
Beispiel für das Booten des Servers von Festplatte 0
Kapitel 3 Einschalten des Systems
39