Before The First Use; Using The Device - Rondell Rde-1117 Betriebsanweisung

•
If the power cord is damaged, it should be replaced by the
manufacturer, a maintenance service, or similar qualified per-
sonnel to avoid potential injury.
•
To avoid potential injury, do not attempt to repair the device
by yourself. Do not disassemble the device by yourself, if any
malfunction is detected or after the device has been dropped,
unplug the device and contact any authorized service center
from the contact address list given in the warranty certificate
and on the website www.rondell.ru.
•
Transport the unit in the original packaging only.
•
Keep the device in a dry cool place out of reach of children and
people with disabilities.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. COM-
MERCIAL USAGE AND USAGE OF THE UNIT IN PRODUCTION
AREAS AND WORK ROOMS IS PROHIBITED.

BEFORE THE FIRST USE

Read this manual before using the device for the first time and
keep it for the entire usage period.
After device transportation or storage at low temperature,
keep it for at least three hours at room temperature before
switching on.
•
Remove the coffee machine from its packaging and discard
the packing materials.
•
Place the coffee machine on a dry stable even surface.
•
Check the unit integrity; do not use the unit in case of damage.
•
Make sure that the operating voltage of the coffee machine
corresponds to the mains voltage.
•
Remove the drip tray (11) and make sure that the used cof-
fee grounds container (12) is installed correctly. To remove
the drip tray, pull it towards you. Insert the tray (11) all the way
back into the lower part of the coffee machine body and check
that the metal grid of the tray is installed correctly.
•
Open the right door (14) and confirm that the brewing unit (13)
is correctly positioned and secured. Close the door.
•
Remove the water tank (2) and rinse it with warm water and
a neutral detergent. To remove the tank, open the lid (1) and
pull it upwards (fig. 1).
•
Fill the tank (2) with clean water up to the maximum mark,
then place it back into the coffee machine and close the
lid (1).
Note: the water tank (2) can be filled only with fresh, clean water
of room temperature. Do not fill it with hot or icy water and milk.
Failure to comply with this requirement may lead to cracks in the
water tank and damage to the device.
ATTENTION!
– When installing the water tank (2), ensure the coffee beans
container lid (3) is securely closed.
– Do not overfill the water tank (2) to prevent water spilling out
when reinserting it into the coffee machine.
– If you use a suitable container to fill the tank with water and do
not remove the tank from the coffee machine, make sure that
the lid of the coffee bean container (3) is tightly closed when
pouring water. Otherwise, water entering the coffee beans
container could damage the coffee grinder.
– Change the water in the tank as frequently as possible! Water
left in the tank for extended periods may contain microorgan-
isms and pose a health risk.
– Wash the water tank (2) with warm water and neutral deter-
gent every 2 weeks to prevent the formation of microorgan-
isms that could pose a threat to your health on its walls.
•
Open the milk container and rinse all parts with warm water
and a neutral detergent.
•
Open the coffee beans container lid (3) and wipe the interior of
the container (5) with a soft, slightly damp cloth, then wipe it dry.
•
Check the position of the grinding adjuster knob. Before first
use, set the grinding adjuster knob (4) to the medium posi-
tion (fig. 2).
•
Fill the container (5) with coffee beans and secure it with the
lid (3) (fig. 3).
•
The coffee machine allows you to prepare coffee beverages
using only whole roasted coffee beans, which are ground by
the built-in grinder for each serving of coffee.
Note: only fill the container with coffee beans to the capacity that
would last several days. Prolonged exposure to air makes coffee
lose its aroma.
Attention! Before making coffee beverages, study the Coffee
Grinding Adjustment section and adjust the grinding size of the
coffee beans accordingly.
ATTENTION! Only put whole roasted coffee beans into coffee
beans container (5). Please do not add water, ground, instant
coffee, instant coffee powder, or other freeze-dried coffee-con-
taining mixtures intended for rapid brewing with hot water, coffee
beans mixed with solid particles, processed bean coffee contain-
ing sugar, caramel, never use coffee beans out of the freezer,
otherwise the knives of the coffee grinder will be damaged.

USING THE DEVICE

Turning on the coffee machine
Insert the power plug into the mains socket.
– Install a container suitable for liquid drainage onto the metal
grid of the tray (11).
– To avoid direct contact with splashes of hot water, adjust the
coffee spout (9) to the appropriate height (fig. 4).
– To turn on the coffee machine, press the power button (10)
« », you will hear a sound signal, and the automatic system
cleaning will activate (fig. 4).
18