Scheppach E-MP320 Originalbetriebsanleitung Seite 23

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised spe-
cialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before
assembly and commissioning. This operating manual
should help you to familiarise yourself with your device
and to use it for its intended purpose. The operating
manual includes important instructions for safe, proper
and economic operation of the device, for avoiding dan-
ger, for minimising repair costs and downtimes, and for
increasing the reliability and extending the service life of
the device. In addition to the safety instructions in this
operating manual, you must also observe the regulations
applicable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work. The device may only be used
by personnel who have been trained to use it and who
have been instructed with respect to the associated haz-
ards. The required minimum age must be observed. In
addition to the safety instructions in this operating manu-
al and the separate regulations of your country, the gen-
erally recognised technical rules relating to the operation
of such machines must also be observed. We accept no
liability for accidents or damage that occur due to a fail-
ure to observe this manual and the safety instructions.
www.scheppach.com · service@scheppach.com
2. Device description (Fig. 1)
1. Switch lock
2. Mains power connection
3. Start lever
4. Upper push bar
5. Cable strain relief
6. Wing nut
7. Lower push rods
8. Catch basket
9. Wheels
10. Transport handle
11. Discharge flap
12. Cable clip
3. Scope of delivery (Fig.1.1)
• Operating manual
• Cable strain relief (a)
• Cable clip (b)
• 4 x screw, ST 4.2x16mm (c)
• 2 x M6 screw (d)
• 2 x wing nut (e)
• 2 x lower push bars (f)
• Catch basket handle (g)
• Bottom half of the catch basket (h)
• Top half of the catch basket (i)
4. Proper use
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
Persons who operate and maintain the machine must
be familiar with it and must be informed about potential
dangers. The liability of the manufacturer and resulting
damages are excluded in the event of modifications of
the machine. The machine may only be operated with
original parts and original accessories from the manu-
facturer. The safety, operating and maintenance speci-
fications of the manufacturer, as well as the dimensions
specified in the technical data, must be observed.
Please note that our equipment was not designed with the
intention of use for commercial or industrial purposes. We
assume no guarantee if the device is used in commercial
GB | 23