Intended Use; General Power Tool Safety Warnings - Ayce MJ10250VIIIC Originalbetriebsanleitung

IMPORTANT INFORMATION
At any time and without prior notice ayce Power tool reserves the right to change
and improve the design and the technical specifications of this product.

INTENDED USE

The power tool is intended as a stationary machine for making straight lengthways
and crossways cuts in wood. Horizontal miter angles as well as vertical bevel angles
are possible. The machine is designed with sufficient capacity for sawing hard and
softwood as well as press and particle board.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! To ensure safe operation when using your table saw,
make sure you follow basic safety principles to reduce risk of
personal injury, electric shock and fire. Please read the following
instructions prior to operating this product and keep for future use.
! WARNING! When using electric tools basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
personal injury including the following.
Read all these instructions before attempting to operate this product
WARNING
and save these instructions.
Safety Precautions
• Keep work area clean
Cluttered areas and benches invite injuries.
• Consider work area environment
Do not expose power tools to rain. Do not use tools in damp or wet locations. Keep
work area well lit. Do not use tools in the presence of flammable liquids or gases.
• Guard against electric shock
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators,
ranges, refrigerators).
• Keep other persons away
Do not let persons, especially children, not involved in the work touch the tool or
the extension cord and keep them away from the work area.
• Store idle tools
When not in use, tools should be stored in a dry locked-up place, out of reach of
children.
• Don't force tool
It will do the job better and safer at the rate for which it was intended.
• Use the right tool
Do not force small tools to do the job of a heavy duty tool. Do not use tools for
purposes not intended; for example do not use circular saws to cut tree limbs
or logs.
• Dress properly
Do not wear loose clothing or jewellery, they can be caught in moving parts.
Non-skid footwear is recommended when working outdoors. Wear protective
hair covering to contain long hair.
• Use protective equipment
Use safety glasses. Use face or dust mask if working operations create dust.
• Connect dust extraction equipment
If the tool is provided for the connection of dust extraction and collecting
equipment, ensure these are connected and property used.
• Do not abuse the cord.
Never yank the cord to disconnect if from the socket. Keep the cord away from
heat, oil and sharp edges.
• Secure work.
Where possible use clamps or a vice to hold the work. It is safer than using your
hand.
• Do not overreach.
Keep proper footing and balance at all times.
• Maintain tool with care.
Keep cutting tools sharp and clean for better and safer performance. Follow
instruction for lubricating and changing accessories. Inspect tool
174 | 175
GB
cords