Ayce MJ10250VIIIC Originalbetriebsanleitung Seite 92

Switch the product off and disconnect it from
the power supply before assembly, cleaning,
adjustments, maintenance, storage and transportation.
The product complies with the applicable European
directives and an evaluation method of conformity
for these directives was done.
Class II symbol: this machine is designed with
double insulation. It is not necessary to connect
it to an earthed power socket.
The crossed-out wheeled bin symbol indicates
that the item should be disposed of separately
from household waste. The item should be
handed in for recycling in accordance with local
environmental regulations for waste disposal.
By separating a marked item from household
waste, you will help reduce the volume of waste
sent to incinerators or land-fill and minimize any
potential negative impact on human health and
the environment.
2. Product symbols
In this manual and/or on the machine the following symbols are used. These
represent important information about the product or instructions on its use.
2000 W
Rated Output
2000 W
230-240 V~50 Hz
Rated Voltage
230-240 V~
50Hz
80 mm (90°)
90°
Max. Cuttind Depth
80 mm
55 mm (45°)
45°
Max. Cuttind Depth
55 mm
4500 min -1
min
-1
No Load Speed
4500
254 x 30 x 2.8 mm 40 T
Blade Size and Tooth
254 x 30 x
2.8mm 40T
645 x 530 mm
Main Table Size
645 x 530mm
3 m Cable with Swiss
Plug
3M
182 | 183
GB
2 mm
Thickness of Riving
Knife
Only Use for Wood
170 mm
Max. Extension
Length
170mm