Ayce MJ10250VIIIC Originalbetriebsanleitung Seite 100

Fig. 31 Fig. 31
Fig. 32
Release lever
! The release lever will close over the center brace locking the stand
in an open position. (Fig. 32)
WARNING
• Once the stand is released from the
release lever, slide stand towards the
floor by pushing the grips toward the
floor. (Fig. 31)
• With your hands on the grips, push the
stand towards the ground until the table
saw is in an open position. (Fig. 32)
r. To store the table saw accessories (Fig. 33)
Fig. 33 Blade
Blade wrench
Rip fence
Push stick
Miter gauge
Plug cable
198 | 199
• The table saw has three convenient
storage areas (one on either side and
back of the saw cabinet) specifically
designed for the saw's accessories.
These accessories must be securely
stored and the side and rear extension
tables must be locked prior to closing
the stand and moving the saw.
GB