Proper Use - Ayce J1X-SM01A-216 Originalbetriebsanleitung

IMPORTANT INFORMATION
At any time and without prior notice ayce Power tool reserves the
!
right to change and improve the design and the technical specifi-
cations of this product.
WARNING

PROPER USE

CE tested machines meet all valid EC machine guidelines as well as all relevent
guidelines for each machine.
• The trim, mitre and bevel saw is used to mitre wood, mate-
!
• Warning! The supplied saw blade is only intended for the sa-
WARNING
• The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused as a result of this.
• The equipment is to be operated only with suitable saw blades. It is prohibited to
use any type of cutting-off wheel.
• To use the equipment properly you must also observe the safety information, the
assembly instructions and the operating instructions to be found in this manual.
• All persons who use and service the equipment have to be acquainted with this
manual and must be informed about the equipment's potential hazards. It is also
imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of health and safety at work.
• The manufacturer will not be liable for any changes made to the equipment nor
for any damage resulting from such changes. Even when the equipment is used
as prescribed it is still impossible to eliminate certain residual risk factors. The
following hazards may arise in connection with the machine's construction and
design:
• Contact with the saw blade in the uncovered saw zone
• Reaching into the running saw blade (cut injuries)
• Kick-back of workpieces and parts of workpieces
• Saw blade fracturing
• Catapulting of faulty carbide tips from the saw blade
• Damage to hearing if ear-muffs are not used as necessary
• Harmful emissions of wood dust when used in closed rooms
rials similar to wood, plastics and non-ferrous metals, with
the exception of magnesium and alloys containing magnesi-
um, according to the machine size.
wing of wood! Do not use this blade for the sawing of plastic!