Refco VAMP-F Bedienungsanleitung Seite 7

8.6 Locate Pump (flat)
Horizontal installation of the pump is essential for operation. Mount
the pump with two cable ties to the flat surface.
8.7 Connect Discharge Tube
Connect ¼" / 6 mm discharge tube to the outlet connector. Ensure
that the discharge tube has no kinks along its length that will
prevent water from flowing.
When you remove the discharge tube, do
always use a knife cutting the tube. Too
heavy force may destroy the pump.
Instruction Manual
8.8 Install the anti-siphon valve in your discharge tube.
Instruction Manual