Mato RP 100-PP Betriebsanleitung Seite 8

Operation:
Rotate handle clockwise several times to prime. f unit does not prime after a few

turns, pour some fluid into pump inlet may help free pump.
For siphoning, position handle straight down.

To stop siphoning, rotate handle 1/4 turn (leave handle in horizontal position).

After using pump, position handle straight down, liquid will drain back to container.

If pump is removed from drum, rinse it thoroughly in a liquid that is compatible with

both the pump and the fluid being pumped.
Regularly check pump and suction tubes for leaks. Leaks in the suction line or in

pump housing will cause inefficient pumping and loss of prime.
Maintenance:
Make a regular check on the pressurised components of the rotary pump.
Replace defective or damaged parts with genuine spares without delay.
Warranty:
If the operating instructions are complied with and the equipment used in accordance with the
directions, we accept liability within the bounds of the statutory warranty obligation (see our conditions
of delivery).
When making warranty claims always attach the invoice from your dealer, giving the date of purchase.
Disposal:
After termination of use, the device must be disposed of correctly in accordance with
the applicable legal regulations.
Your contribution to environmental protection:
The operator must observe the applicable regulations for the display, installation and operation
of systems for handling substances hazardous to water. (such as WHG, VawS and TRbF)
(Federal German Water Act, Order on the storage, filling and transfer of hazardous media and
Technical Regulations for Flammable Liquids)
8
MATO GmbH & Co. KG / Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:+49(0)6108-906-0 / Fax:+49(0)6108-906-120
Betriebsanleitung / Operating manual / Mode d'emploi / Instrucciones de uso
RP 100-PP