Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remove the batteries/rechargeable
¡
¡
batteries if the product will not be used
for a longer period.
Risk of damage of the product
Only use the specified type of battery /
¡
¡
rechargeable battery!
When inserting ensure the correct
¡
¡
polarity! This is shown inside the battery
compartment!
Clean the contacts on the battery and
¡
¡
in the battery compartment before
inserting!
Remove exhausted batteries /
¡
¡
rechargeable batteries from the product
immediately.
˜ Before start of operation
˜ Insert / replace battery (see Figure B)
Tip: Flashing numbers indicate a discharged / flat battery.
Tip: When changing the battery, the LCD display 5 may
experience faults. Remove the battery and insert it again after
waiting more than 30 seconds.
Push open the lid to the battery
¡
¡
compartment 8 (see Fig. B).
Remove the old battery.
¡
¡
Push the lid to the battery compartment 8 shut again
¡
¡
(see Fig. B).
al
˜ Preparing the calliper
Loosen the locking screw 4 so that you can move the
¡
¡
calliper.
Clean all measuring surfaces 1 and the calliper rod with a
¡
¡
e
dry cloth. Otherwise, faulty measuring results may occur due
to, for example, humidity.
Check that all keys and the LCD display 5 work correctly.
¡
¡
16_Mod_A_OS_01.indb 21
Insert the new battery into the battery compartment
and ensure correct polarity (+ and –). Make sure that
the plus terminal points outwards.
GB/IE
21
17/5/2019 11:38
Werbung
