Thermalright AXP-100RH Montageanleitung Seite 56

Installing
Stepl :
Step 1: Pass the M3L10 Screws through
Small Intel Washers then place through
motherboard. Screw
M3L10 Screws. Place the Anchoring Mount on
the Screw Nuts, then use the four M3L6 Srews to
fix the Anchoring Mount on to the Screw Nuts.
Step 3:
Step 3: Place the TY-IOOR Fan onto the Heatsink
Body. And then secure it by screwing
the four M3L17 Screws through
mounting hole.
53
Your AXP-I OORWithout
the Screw Nuts onto
the fan'
Thermalright
a Back Plate
Step 2:
the Step 2: Apply Thermal Paste to your cooler and
your the CPU. Passthe Mounting
the cooler and screw
Step 4:
Step 4: Plug in the fan connector
on CPU PWM Fan socket on the motherboard.
s Installation Complete.
Plate through the
on the two M3L6 Screw.
to the