Intel 775/1150/1151/1155/1156/1366 TRUE Spirit 90M Rev.A Exploded View Important! Before proceeding with installation, please check for the most up-to-date instructions at www.thermalright.com Anti Vibration Strips Fan Clip Heatsink Body 92mm Fan Mounting Plate M3 L6 Screw Anchoring Mount Screw Nut...
Seite 5
Screw Nut ×4 M3 L10 Screw ×5 M3 L6 Screw ×7 AMD Washer (big) ×4 Intel Washer (small) ×4 Backplate Cap ×1 Thermal Paste ×1 92mm Fan×1 Fan Clip Anti Vibration Strips ×2 Mylar Film ×1 ×2 The Ultimate Cooling Solutions! www.thermalright.com...
Installation Instructions: Step 1: 1150 1151 1366 1155 1156 Step 1 : Backplate Installation Choose the platform (775/1150/1151/1155/1156/1366) you are in use. Make four M3L10 Screw Pillars go through the Metal Back Plate and the Mylar film from bottom towards top. And then place the Metal Back Plate on the table.
Seite 7
Step 8 : Installation Completed Place the included 120mm Fan into the Fan Plug in the fan connector to the CPU PWM Cover. Then clip the Fan Cover to the heatsink Fan socket on the motherboard. Installation body. complete. The Ultimate Cooling Solutions! www.thermalright.com...
Seite 8
AM2/AM2+/AM3/AM3+/AM4/FM1/FM2/FM2+ TRUE Spirit 90M Rev.A Exploded View Important! Before proceeding with installation, please check for the most up-to-date instructions at www.thermalright.com Anti Vibration Strips Fan Clip Heatsink Body 92mm Fan M3 L6 Screw Anchoring Mount Mounting Plate Screw Nut AMD Washer(big)
Seite 9
CPU socket from bottom towards top. Cap the screw pillar with the screw nut included and then tighten up. Now repeat this installation for the other three screw pillars in a criss-cross pattern. The Ultimate Cooling Solutions! www.thermalright.com...
Seite 10
Step 4: Step 4 : Place the Anchoring Mount on the Screw Nuts. Use the four M3L6 Screws to fix the Anchoring Mount on to the Screw Nuts. Step 5: Step 6: Step 5 : Applying Thermal Paste. Step 5 : Fan Installation Apply the Thermal Paste to the base of the Heatsink Pass one end of the Fan Clip through the and the surface of the CPU evenly.
Intel 775/1150/1151/1155/1156/1366 TRUE Spirit 90M Rev.A Explosionszeichnung Wichtig! Bitte prüfen Sie vor der Montage ob für Ihren Kühler aktualisierte Montagehinweise auf der Webseite www.thermalright.com verfügbar sind. Anti Vibrationsstreifen Lüfterklammer Kühlkörper 92 mm Lüfter Befestigungsplatte M3L6 Schraube Montagerahmen Rändelschraube Backplate Einsatz...
Seite 12
Komponenten Chill Factor Multi Platform Kühlkörper ×1 Montagerahmen ×1 Backplate x1 Befestigungsplatte ×1 Rändelschraube ×4 M3 L10 Schraube ×5 Intel Unterlegscheibe AMD Unterlegscheibe M3 L6 Schraube ×7 (klein)×8 (groß)×4 Backplate Cap ×1 Wärmeleitpaste ×1 92 mm Lüfter ×1 Lüfterklammer ×5 Anti Vibrationsstreifen ×2 Leitschutzfolie ×1...
Seite 13
Montagelöcher des Mainboards, die sich um den CPU Sockel herum befinden. Nun drehen Sie die Rändelschrauben von oben auf die hervorstehenden Gewinde und ziehen diese in kreuzweiser Reihenfolge (siehe Abbildung) vorsichtig an. The Ultimate Cooling Solutions! www.thermalright.com...
Seite 14
Schritt 4: Setzen Sie den Montagerahmen auf die Rändelschrauben. Verwenden Sie die vier M3L6 Schrauben, um den Montagerahmen auf den Rändelschrauben zu befestigen. Schritt 5: Schritt 6: Tragen Sie eine hauchdünne Schicht Wärmeleitpaste Führen Sie zuerst das untere Ende auf der Oberfläche der CPU und auf der Unterseite der Lüfterklammer durch das untere des Kühlers auf.
Seite 15
AM2/AM2+/AM3/AM3+/AM4/FM1/FM2/FM2+ TRUE Spirit 90M Rev.A TRUE Spirit 90M Rev.A Explosionszeichnung Wichtig! Bitte prüfen Sie vor der Montage ob für Ihren Kühler aktualisierte Montagehinweise auf der Webseite www.thermalright.com verfügbar sind. Anti Vibrationsstreifen Lüfterklammer Kühlkörper 92 mm Lüfter Befestigungsplatte Montagerahmen Rändelschraube M3L6 Schraube AMD Unterlegscheibe (groß)
Seite 16
Installationsanleitung: Schritt 1: Achten Sie auf die für den AMD Sockel vorgesehene Bohrungen in der Multi Plattform Backplate. Führen Sie die vier M3L10 Schrauben jeweils von unten durch die Backplate und die mitgelieferte Leitschutzfolie und legen dann die Backplate auf den Tisch. Legen Sie die vier Unterlegscheiben (für AMD) über die hervorstehenden Gewinde.
Seite 17
Lüfterklammern. Hierzu ziehen Sie an den am an. Bitte prüfen Sie die ordnungsgemäße Kühlkörper befestigten Klammern, um die Ecken Funktion vor der Inbetriebnahme Ihres PC. Die in die Befestigungslöchern im Lüfterrahmen des Installation ist abgeschlossen. Lüfters einrasten zu lassen. The Ultimate Cooling Solutions! www.thermalright.com...
TRUE Spirit 90M Rev.A Technische Spezifikationen Kühlkörper Spezifikationen: Maße (in mm): Länge 102 x Breite 55 x Höhe 125 Gewicht: 285 g Heatpipe: 6 mm Heatpipe *3 Stück Kupfergrundplatte: C1100 Reines Kupfer vernickelt Lüfter Spezifikationen: Maße (in mm): L92 x H92 x B25...
Seite 27
TRUE Spirit 90M Rev.A 散熱器規格 散熱器規格書 : 尺寸 : 長 102mm x 寬 55mm x 高 125mm 重量 :285 克 ( 本體重量 ) 導熱管 :6mm 熱導管 *3 支 銅底 :C1100 純銅底座鍍鎳處理 風扇規格書 : 尺寸 : 長 92mm x 寬 92mm x 高 25mm 重量...
Seite 29
TRUE Spirit 90M Rev.A Thermalright TRUE Spirit Series TRUE Spirit 140 Rev.A TRUE Spirit 120 Rev.A TRUE Spirit 90 Rev.A The Ultimate Cooling Solutions! www.thermalright.com...
Seite 32
The Ultimate Cooling Solutions! www.thermalright.com Thermalright Produkte werden in Europa importiert und vertrieben TEL: +886-2-2915-5005 durch die: FAX: +886-2-2915-5123 PC-Cooling GmbH Eichenallee 3 EMAIL: sales@thermalright.com 24589 Nortorf...