Cleaning And Maintenance; Replacing The Crossfader - Omnitronic PM-3010 Bedienungsanleitung

7 CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

7.1 Replacing the crossfader

Procedure:
Step 1: Remove the fader knob.
Step 2: Remove the two outer screws on the fader panel.
Step 3: Take the fader out and unplug the connection cable.
Step 4: Connect the new fader and fix it in the unit.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
29/31 00043092.DOC, Version 2.0